Menu
Premium PE Foam Underlayment For Laminate and Floating Wood Floors with Moisture Barrier.
- The moisture barrier film and tape strip combine to lock out moisture and allow for quick and easy installation
- Provides cushioned comfort under laminate and floating wood floors
- Eliminates minor subfloor imperfections
- Suitable for use with radiant heat flooring systems
- 100% recyclable, environmentally friendly
- Naturally resistant to mold and mildew
- Non allergenic and odorless
APPROVED SUBSTRATES
- Dry, completely cured concrete (at least 14 days old with HVAC operating)
- 3/4" interior plywood or OSB flooring
- Waterproofing and crack-isolation membranes
- Cement backer units
- Subfloor should be clean and dry
- In geographic areas where concrete subfloors are subject to excessive moisture, a calcium chloride moisture test is required. Vapor emission readings in excess of 3 lbs. per 1,000 square feet in 24 hrs will require additional protection such as concrete sealant or polyethylene sheeting.
QUICK AND EASY INSTALLATION
requires no additional seaming tape, cuts with a knife
- Roll out underlayment with tape strip next to wall. Roll out next row in same manner butting underlayment close to first row ( do not overlap ) and covering the moisture barrier film. Remove the tape strip and secure the overlapping moisture barrier film.
- Install flooring according to the manufacturer's installation instructions
*NOT for glue down installations
PACKAGING
Available in 4' x 25' (100 sq. ft.) rolls and 4' x 250 (1000 sq. ft.) contractor size rolls
|
Home | About us | Contact Us
Address: 
Foam Products, 350 Beamer Road, Calhoun, GA 30701, USA
Phone: 800-526-FOAM (3626) | Email: info@foamproducts.com
